Prometheus provides a functional query language called PromQL (Prometheus Query Language) that lets the user select and aggregate time series data in real time.
When you send a query request to Prometheus, it can be an instant query, evaluated at one point in time, or a range query at equally-spaced steps between a start and an end time. PromQL works exactly the same in each cases; the range query is just like an instant query run multiple times at different timestamps.
In the Prometheus UI, the "Table" tab is for instant queries and the "Graph" tab is for range queries.
Other programs can fetch the result of a PromQL expression via the HTTP API.
This document is a Prometheus basic language reference. For learning, it may be easier to start with a couple of examples.
In Prometheus's expression language, an expression or sub-expression can evaluate to one of four types:
Depending on the use-case (e.g. when graphing vs. displaying the output of an expression), only some of these types are legal as the result of a user-specified expression. For instant queries, any of the above data types are allowed as the root of the expression. Range queries only support scalar-typed and instant-vector-typed expressions.
Notes about the experimental native histograms:
String literals are designated by single quotes, double quotes or backticks.
PromQL follows the same escaping rules as
Go. For string literals in single or double quotes, a
backslash begins an escape sequence, which may be followed by a, b, f,
n, r, t, v or \. Specific characters can be provided using octal
(\nnn) or hexadecimal (\xnn, \unnnn and \Unnnnnnnn) notations.
Conversely, escape characters are not parsed in string literals designated by backticks. It is important to note that, unlike Go, Prometheus does not discard newlines inside backticks.
Example:
"this is a string"
'these are unescaped: \n \\ \t'
`these are not unescaped: \n ' " \t`
Scalar float values can be written as literal integer or floating-point numbers in the format (whitespace only included for better readability):
[-+]?(
[0-9]*\.?[0-9]+([eE][-+]?[0-9]+)?
| 0[xX][0-9a-fA-F]+
| [nN][aA][nN]
| [iI][nN][fF]
)
Examples:
23
-2.43
3.4e-9
0x8f
-Inf
NaN
Additionally, underscores (_) can be used in between decimal or hexadecimal
digits to improve readability.
Examples:
1_000_000
.123_456_789
0x_53_AB_F3_82
Float literals are also used to specify durations in seconds. For convenience, decimal integer numbers may be combined with the following time units:
ms – millisecondss – seconds – 1s equals 1000msm – minutes – 1m equals 60s (ignoring leap seconds)h – hours – 1h equals 60md – days – 1d equals 24h (ignoring so-called daylight saving time)w – weeks – 1w equals 7dy – years – 1y equals 365d (ignoring leap days)Suffixing a decimal integer number with one of the units above is a different representation of the equivalent number of seconds as a bare float literal.
Examples:
1s # Equivalent to 1.
2m # Equivalent to 120.
1ms # Equivalent to 0.001.
-2h # Equivalent to -7200.
The following examples do not work:
0xABm # No suffixing of hexadecimal numbers.
1.5h # Time units cannot be combined with a floating point.
+Infd # No suffixing of ±Inf or NaN.
Multiple units can be combined by concatenation of suffixed integers. Units must be ordered from the longest to the shortest. A given unit must only appear once per float literal.
Examples:
1h30m # Equivalent to 5400s and thus 5400.
12h34m56s # Equivalent to 45296s and thus 45296.
54s321ms # Equivalent to 54.321.
These are the basic building-blocks that instruct PromQL what data to fetch.
Instant vector selectors allow the selection of a set of time series and a single sample value for each at a given timestamp (point in time). In the simplest form, only a metric name is specified, which results in an instant vector containing elements for all time series that have this metric name.
The value returned will be that of the most recent sample at or before the
query's evaluation timestamp (in the case of an
instant query)
or the current step within the query (in the case of a
range query).
The @ modifier allows overriding the timestamp relative to which
the selection takes place. Time series are only returned if their most recent sample is less than the lookback period ago.
This example selects all time series that have the http_requests_total metric
name, returning the most recent sample for each:
http_requests_total
It is possible to filter these time series further by appending a comma-separated list of label
matchers in curly braces ({}).
This example selects only those time series with the http_requests_total
metric name that also have the job label set to prometheus and their
group label set to canary:
http_requests_total{job="prometheus",group="canary"}
It is also possible to negatively match a label value, or to match label values against regular expressions. The following label matching operators exist:
=: Select labels that are exactly equal to the provided string.!=: Select labels that are not equal to the provided string.=~: Select labels that regex-match the provided string.!~: Select labels that do not regex-match the provided string.Regex matches are fully anchored. A match of env=~"foo" is treated as env=~"^foo$".
For example, this selects all http_requests_total time series for staging,
testing, and development environments and HTTP methods other than GET.
http_requests_total{environment=~"staging|testing|development",method!="GET"}
Label matchers that match empty label values also select all time series that do not have the specific label set at all. It is possible to have multiple matchers for the same label name.
For example, given the dataset:
http_requests_total
http_requests_total{replica="rep-a"}
http_requests_total{replica="rep-b"}
http_requests_total{environment="development"}
The query http_requests_total{environment=""} would match and return:
http_requests_total
http_requests_total{replica="rep-a"}
http_requests_total{replica="rep-b"}
and would exclude:
http_requests_total{environment="development"}
Multiple matchers can be used for the same label name; they all must pass for a result to be returned.
The query:
http_requests_total{replica!="rep-a",replica=~"rep.*"}
Would then match:
http_requests_total{replica="rep-b"}
Vector selectors must either specify a name or at least one label matcher that does not match the empty string. The following expression is illegal:
{job=~".*"} # Bad!
In contrast, these expressions are valid as they both have a selector that does not match empty label values.
{job=~".+"} # Good!
{job=~".*",method="get"} # Good!
Label matchers can also be applied to metric names by matching against the internal
__name__ label. For example, the expression http_requests_total is equivalent to
{__name__="http_requests_total"}. Matchers other than = (!=, =~, !~) may also be used.
The following expression selects all metrics that have a name starting with job::
{__name__=~"job:.*"}
The metric name must not be one of the keywords bool, on, ignoring, group_left and group_right. The following expression is illegal:
on{} # Bad!
A workaround for this restriction is to use the __name__ label:
{__name__="on"} # Good!
All regular expressions in Prometheus use RE2 syntax.
Range vector literals work like instant vector literals, except that they
select a range of samples back from the current instant. Syntactically, a
float literal is appended in square
brackets ([]) at the end of a vector selector to specify for how many seconds
back in time values should be fetched for each resulting range vector element.
Commonly, the float literal uses the syntax with one or more time units, e.g.
[5m]. The range is a left-open and right-closed interval, i.e. samples with
timestamps coinciding with the left boundary of the range are excluded from the
selection, while samples coinciding with the right boundary of the range are
included in the selection.
In this example, we select all the values recorded less than 5m ago for all
time series that have the metric name http_requests_total and a job label
set to prometheus:
http_requests_total{job="prometheus"}[5m]
The offset modifier allows changing the time offset for individual
instant and range vectors in a query.
For example, the following expression returns the value of
http_requests_total 5 minutes in the past relative to the current
query evaluation time:
http_requests_total offset 5m
Note that the offset modifier always needs to follow the selector
immediately, i.e. the following would be correct:
sum(http_requests_total{method="GET"} offset 5m) // GOOD.
While the following would be incorrect:
sum(http_requests_total{method="GET"}) offset 5m // INVALID.
The same works for range vectors. This returns the 5-minute rate
that http_requests_total had a week ago:
rate(http_requests_total[5m] offset 1w)
When querying for samples in the past, a negative offset will enable temporal comparisons forward in time:
rate(http_requests_total[5m] offset -1w)
Note that this allows a query to look ahead of its evaluation time.
The @ modifier allows changing the evaluation time for individual instant
and range vectors in a query. The time supplied to the @ modifier
is a unix timestamp and described with a float literal.
For example, the following expression returns the value of
http_requests_total at 2021-01-04T07:40:00+00:00:
http_requests_total @ 1609746000
Note that the @ modifier always needs to follow the selector
immediately, i.e. the following would be correct:
sum(http_requests_total{method="GET"} @ 1609746000) // GOOD.
While the following would be incorrect:
sum(http_requests_total{method="GET"}) @ 1609746000 // INVALID.
The same works for range vectors. This returns the 5-minute rate that
http_requests_total had at 2021-01-04T07:40:00+00:00:
rate(http_requests_total[5m] @ 1609746000)
The @ modifier supports all representations of numeric literals described above.
It works with the offset modifier where the offset is applied relative to the @
modifier time. The results are the same irrespective of the order of the modifiers.
For example, these two queries will produce the same result:
# offset after @
http_requests_total @ 1609746000 offset 5m
# offset before @
http_requests_total offset 5m @ 1609746000
Additionally, start() and end() can also be used as values for the @ modifier as special values.
For a range query, they resolve to the start and end of the range query respectively and remain the same for all steps.
For an instant query, start() and end() both resolve to the evaluation time.
http_requests_total @ start()
rate(http_requests_total[5m] @ end())
Note that the @ modifier allows a query to look ahead of its evaluation time.
Subquery allows you to run an instant query for a given range and resolution. The result of a subquery is a range vector.
Syntax: <instant_query> '[' <range> ':' [<resolution>] ']' [ @ <float_literal> ] [ offset <float_literal> ]
<resolution> is optional. Default is the global evaluation interval.Prometheus supports many binary and aggregation operators. These are described in detail in the expression language operators page.
Prometheus supports several functions to operate on data. These are described in detail in the expression language functions page.
PromQL supports line comments that start with #. Example:
# This is a comment
The timestamps at which to sample data, during a query, are selected
independently of the actual present time series data. This is mainly to support
cases like aggregation (sum, avg, and so on), where multiple aggregated
time series do not precisely align in time. Because of their independence,
Prometheus needs to assign a value at those timestamps for each relevant time
series. It does so by taking the newest sample that is less than the lookback period ago.
The lookback period is 5 minutes by default, but can be
set with the --query.lookback-delta flag
If a target scrape or rule evaluation no longer returns a sample for a time series that was previously present, this time series will be marked as stale. If a target is removed, the previously retrieved time series will be marked as stale soon after removal.
If a query is evaluated at a sampling timestamp after a time series is marked as stale, then no value is returned for that time series. If new samples are subsequently ingested for that time series, they will be returned as expected.
A time series will go stale when it is no longer exported, or the target no longer exists. Such time series will disappear from graphs at the times of their latest collected sample, and they will not be returned in queries after they are marked stale.
Some exporters, which put their own timestamps on samples, get a different behaviour:
series that stop being exported take the last value for (by default) 5 minutes before
disappearing. The track_timestamps_staleness setting can change this.
If a query needs to operate on a substantial amount of data, graphing it might time out or overload the server or browser. Thus, when constructing queries over unknown data, always start building the query in the tabular view of Prometheus's expression browser until the result set seems reasonable (hundreds, not thousands, of time series at most). Only when you have filtered or aggregated your data sufficiently, switch to graph mode. If the expression still takes too long to graph ad-hoc, pre-record it via a recording rule.
This is especially relevant for Prometheus's query language, where a bare
metric name selector like api_http_requests_total could expand to thousands
of time series with different labels. Also, keep in mind that expressions that
aggregate over many time series will generate load on the server even if the
output is only a small number of time series. This is similar to how it would
be slow to sum all values of a column in a relational database, even if the
output value is only a single number.
This documentation is open-source. Please help improve it by filing issues or pull requests.